Do you know how to get sound from the instruments and singers on the stage to the sound system? 

I have a thorough knowledge of Signal Flow.

I know how to set proper input gain on the mixer.

I know what a stage plot and input list is and what they are used for.

I know how to patch a microphone on stage to the soundboard via the snake.

Phantom power on a mixer is shown as:

On a mixer, the signal passes through what before going to the Aux bus?

To send an input signal to a reverb I would most likely use the:

On the mixer, if the input signal to the channel is too hot you would engage the:

What type of microphone is most often used on cymbals?

A good choice for a kick drum microphone would be:

Which microphone pattern is more likely to cause feedback if used in front of the loudspeakers?

A system EQ would be placed at which point in the signal path?

Which would you use to smooth out signal levels that go from very quiet to very loud?

Which of these help prevent feedback?

During line check I am…

True or False-Sub snakes are used at the mixer for sub mixing inputs.

True or False- When mixing Monitors from the FOH console, Aux sends should be Pre Fader.

True or False- Noise Gates are generally patched to the soundboard via a group bus.

True or False- When setting input gain, the signal should be in the red.

True or False- Nominal gain level on a Digital Console is -0- on the meter.

True or False- Digital consoles usually have a gate and compressor on every channel.

Can you create a great sounding mix without using plug-ins?